# Deck coatings compared

Source: https://roofingbyskyline.com/blog/deck-coating-systems-compared

> Three families of walkable waterproofing cover Bay Area decks and balconies: how each is built, where it shines, and what to ask before you choose.

Published 2026-10-11 · Waterproofing

“Deck coating” covers very different products. Some are a few coats of paint-like acrylic. The systems that belong over a bedroom are engineered, multi-layer membranes with their own data sheets, details and warranties. In the Bay Area, three families do most of that work.

## 1. Elastomeric urethane systems

**How they’re built:** A fluid-applied, rubbery urethane base coat is the waterproofing membrane. Over it goes a wear coat with broadcast aggregate for traction and abrasion resistance, then a UV-stable top coat for color. Plywood joints, cracks and transitions are reinforced first, and sheet-metal flashings go in before any coating.

**Diagram — Pedestrian deck coating over plywood** (layers from the substrate up):

1. Plywood deck, sloped to drain — Re-fastened; slope corrected first
2. Sheet-metal flashings — Door pans, edge and wall metal set first
3. Joint & detail reinforcement — Joints, cracks and transitions
4. Primer — Matched to the substrate
5. Elastomeric base coat — The membrane, built to spec mils
6. Wear coat + broadcast aggregate — Slip resistance and abrasion protection
7. UV-stable top coat — Color finish that seals the aggregate

**Where they shine:**

- Decks and balconies over living space, on plywood or concrete
- Roof decks and mechanical rooms
- Owners who want a seamless, flexible surface that bridges small cracks
- Long-term maintenance: worn surfaces can be cleaned and re-top-coated without removing the membrane

**What to know:** Thickness is everything. These systems are specified in mils, coat by coat, and the only way to know you got them is a contractor who measures. ASTM C957 is the industry specification for this kind of membrane — a cold liquid-applied elastomeric membrane with an integral wearing surface.

Gaco’s urethane walking-deck systems — a fire-retardant UB64 base coat with A38 top coat and granules — are an example we install as a Gaco Qualified Applicator.

## 2. Cementitious lath systems

**How they’re built:** Galvanized metal lath is fastened over the plywood, then a polymer-modified cementitious base coat is troweled into it, followed by texture coats and an acrylic sealer or top coat. Brands such as Westcoat, Pli-Dek and Desert Brand have long histories with this approach in California.

**Where they shine:**

- Wood-framed balconies and walkways where a hard, durable surface is wanted
- Projects with specific fire-rated assembly requirements (verify the listing for the exact assembly)

**What to know:** Cementitious systems are rigid, so detailing at walls, drains and edges is critical. The sealer or top coat needs periodic renewal. Repairs and recoats should stay within the same manufacturer’s system.

## 3. Fleece-reinforced liquid membranes

**How they’re built:** A liquid resin — polyurethane or fast-curing PMMA — is applied, a polyester fleece is embedded wet-on-wet, and more resin saturates it from above. The result is one fully reinforced, seamless membrane that also forms the flashings at every penetration and wall.

**Diagram — Fleece-reinforced liquid membrane** (layers from the substrate up):

1. Structural roof deck — Concrete, plywood or cover board
2. Insulation & cover board — Tapered where drainage needs correcting
3. Primer — Chosen after adhesion testing
4. Resin — saturation coat — Applied wet to receive the fleece
5. Polyester fleece reinforcement — Embedded wet-on-wet, overlapped at laps
6. Resin — top saturation — Fully encapsulates the fleece
7. Surfacing (as specified) — Reflective finish or wearing surface

**Where they shine:**

- Balconies and roof decks finished with **tile, pavers or pedestals**
- Detail-heavy decks with many penetrations, posts and transitions
- Roof-to-deck transitions, where one continuous membrane avoids a seam between trades
- Fast turnarounds, using quick-curing PMMA resins

**What to know:** These are professional systems with strict installation procedures. Kemper System, for example, only issues warranties through Approved Applicators it has trained — which we are.

## Side-by-side

| Feature              | Urethane                           | Cementitious lath                 | Fleece-reinforced liquid             |
| -------------------- | ---------------------------------- | --------------------------------- | ------------------------------------ |
| Membrane             | Elastomeric urethane               | Cementitious over metal lath      | Resin with embedded polyester fleece |
| Feel underfoot       | Firm, slightly resilient           | Hard                              | Depends on finish                    |
| Crack bridging       | Good                               | Limited (rigid)                   | Excellent (reinforced)               |
| Under tile or pavers | Only if the system is rated for it | Not typical                       | Yes — a common use                   |
| Maintenance          | Re-top-coat as it wears            | Reseal periodically               | Renew surfacing as needed            |
| Best fit             | Exposed walkable decks             | Hard-wearing wood-framed walkways | Details, overburden, transitions     |

## A note on fire ratings

Fire ratings belong to **tested assemblies**, not to a product name. The same coating may be rated differently over plywood than over concrete, or only achieve a rating with a specific resurfacer or underlayment. If your project needs a rated assembly, ask your contractor for the listing that matches your exact substrate and build-up.

## How we choose

We start with four questions: What’s the substrate? What goes on top? How is the deck used? And what has failed before? Then we recommend a specific manufacturer system — and explain why — in a written proposal. If you’d like that assessment for your deck, [request it here](https://roofingbyskyline.com/contact).

## Contact

- Phone: (415) 209-5199 (+1-415-209-5199)
- Email: info@roofingbyskyline.com
- Hours: Monday–Friday, 8am–5pm
- Service area: San Francisco and the greater Bay Area — San Francisco, The Peninsula, The East Bay, The South Bay, Marin
- License: California C-39 Roofing, CSLB #1138836 (verify: https://www.cslb.ca.gov/OnlineServices/CheckLicenseII/CheckLicense.aspx)
- Request a free assessment: https://roofingbyskyline.com/contact
