# Title 24 cool roofs and solar-ready roofing

Source: https://roofingbyskyline.com/blog/title-24-cool-roofs-solar-ready

> When California’s energy code requires a cool roof, what “cool” means, how Bay Area climate zones change it, and how to plan a roof around future solar.

Published 2024-06-13 · Updated 2026-10-11 · Roofing

California’s energy code (Title 24, Part 6) sets minimum reflectance for many new roofs and reroofs. Whether yours needs a “cool roof” depends on four things: the **type of building**, the **slope** of the roof, the **climate zone** and **how much of the roof** you’re replacing. Here’s how that plays out in the Bay Area.

> **Code cycles:** The 2025 Energy Code applies to permits applied for on or after January 1, 2026. The cool-roof values below carried over from the 2022 code for nonresidential buildings. Always confirm with your building department — local amendments exist.

## What makes a roof “cool”

Two measured properties:

- **Solar reflectance** — how much sunlight the surface reflects (0 to 1)
- **Thermal emittance** — how readily it sheds the heat it does absorb (0 to 1)

Together they can be expressed as a **Solar Reflectance Index (SRI)**. Title 24 uses **aged** values — measured after three years of weathering — and requires products to be rated and labeled by the **Cool Roof Rating Council (CRRC)**.

*Photo: Infrared comparison of a reflective cool roof surface and a dark roof surface.*

## Nonresidential buildings

For nonresidential reroofs, the requirement is triggered when **more than 50% of the roof, or more than 2,000 square feet — whichever is less** — is replaced, recovered or recoated.

| Roof                   | Climate zones | Aged reflectance | Emittance | or SRI |
| ---------------------- | ------------- | ---------------- | --------- | ------ |
| Low-slope (under 2:12) | All           | 0.63             | 0.75      | 75     |
| Steep-slope            | 1 and 3       | 0.20             | 0.75      | 16     |
| Steep-slope            | 2 and 4–16    | 0.25             | 0.80      | 23     |

There are exceptions — for example, roof area under integrated solar panels, and heavy roofs over a certain weight — and an insulation trade-off for low-slope roofs that can’t meet the reflectance.

## Single-family homes

For homes, the climate zone matters more. When more than half the roof is replaced, cool-roof requirements apply to **steep-slope** reroofs in climate zones 4 and 8–15, and to **low-slope** reroofs in zones 4 and 6–15, with alternatives such as added attic insulation or a radiant barrier available for steep-slope roofs.

In practice, that means a reroof in a **San Francisco or Oakland** neighborhood (climate zone 3) often has no cool-roof requirement, while one in **San Jose** (zone 4) often does. Climate zones are mapped by address, so we check yours before we quote.

## Does a cool roof still make sense in the fog?

Often, yes. Even foggy neighborhoods get strong afternoon sun, and a reflective surface runs cooler, which reduces heat stress on the roofing itself. On flat roofs, white membranes and coatings are the standard choice anyway.

*Photo: Reflective low-slope roofs and a standing seam metal roof with solar on Bay Area buildings.*

## Planning a solar-ready roof

If solar is in your plans, the new roof is the moment to prepare for it:

- **Sequence it right.** Replace the roof before panels go on — removing and reinstalling an array later is expensive.
- **Plan attachment zones.** Mark framing and attachment areas, and keep walkways and fire setbacks clear.
- **Flash attachments into the roof system.** On shingle roofs, use flashed mounts; on standing seam metal, seam clamps avoid penetrations entirely.
- **Choose a long-life roof.** The roof under an array should last as long as the panels.
- **Document it.** Layout notes help your solar installer protect the roof — and its warranty.

## How we handle it

We check the climate zone and trigger for your project, specify CRRC-rated products where required, prepare the energy-code paperwork for the permit, and coordinate with your solar installer. [Request an assessment](https://roofingbyskyline.com/contact) and we’ll tell you exactly what applies to your roof.

## Contact

- Phone: (415) 209-5199 (+1-415-209-5199)
- Email: info@roofingbyskyline.com
- Hours: Monday–Friday, 8am–5pm
- Service area: San Francisco and the greater Bay Area — San Francisco, The Peninsula, The East Bay, The South Bay, Marin
- License: California C-39 Roofing, CSLB #1138836 (verify: https://www.cslb.ca.gov/OnlineServices/CheckLicenseII/CheckLicense.aspx)
- Request a free assessment: https://roofingbyskyline.com/contact
