# Flat & low-slope roofing

Source: https://roofingbyskyline.com/roofing/flat-roofing

> TPO, PVC and modified bitumen flat roofs for Bay Area homes and buildings — tapered for drainage, heat-welded and Title 24 cool-roof compliant.

Flat roofs are everywhere in the Bay Area — on Victorians, mid-century homes, apartments and commercial buildings. The difference between a flat roof that lasts and one that leaks is almost always drainage and details.

We install single-ply TPO and PVC and modified bitumen systems with tapered insulation to eliminate ponding, heat-welded seams that are probed every day, and reflective surfaces that meet California’s cool-roof requirements. For detail-heavy roofs, we also install fleece-reinforced liquid membranes.

## Ideal for

- Flat-roofed homes and Victorians
- Apartments and condos
- Commercial buildings
- Roofs with ponding problems

## Why it works

- **Positive drainage.** Tapered insulation builds slope to drains so water doesn’t sit on the roof.
- **Heat-welded seams.** TPO and PVC seams are welded, not glued, and probed for continuity.
- **Cool-roof compliant.** Reflective membranes meet Title 24 requirements where a reroof triggers them.
- **Options for every roof.** Single-ply, modified bitumen or fleece-reinforced liquid — chosen for the roof, not by habit.

## The system: TPO / PVC single-ply roof

Tapered insulation for positive drainage, a cover board for durability, and a reflective, heat-welded membrane that meets California’s cool-roof rules.

Layers, from the substrate up:

1. **Roof deck** — Steel, concrete or wood
2. **Tapered insulation** — Builds slope to drains and scuppers
3. **Cover board** — Protects against foot traffic and hail
4. **TPO or PVC membrane** — Heat-welded seams, probed every day

## Our process

1. **Survey drainage.** Map ponding, drains and scuppers, and design tapered insulation where needed.
2. **Tear-off and deck repair.** Remove wet or failed roofing and repair the deck.
3. **Install the system.** Insulation, cover board and membrane, with every curb, drain and wall flashed.
4. **Probe and document.** Seams probed, details photographed, warranty paperwork registered.

## Quality checks on every job

- Ponding corrected with slope, not sealant
- Every heat-welded seam probed
- Edge metal and terminations installed to manufacturer detail
- Cool-roof-rated membranes where Title 24 applies

## FAQ

### TPO or PVC?

Both are proven. PVC is often preferred where grease or chemicals are present, such as near restaurant exhausts. We’ll recommend based on your building.

### How long does a flat roof last?

Single-ply systems commonly last 20–30 years with maintenance. Drainage and details matter more than the membrane brand.


## Contact

- Phone: (415) 209-5199 (+1-415-209-5199)
- Email: info@roofingbyskyline.com
- Hours: Monday–Friday, 8am–5pm
- Service area: San Francisco and the greater Bay Area — San Francisco, The Peninsula, The East Bay, The South Bay, Marin
- License: California C-39 Roofing, CSLB #1138836 (verify: https://www.cslb.ca.gov/OnlineServices/CheckLicenseII/CheckLicense.aspx)
- Request a free assessment: https://roofingbyskyline.com/contact
