# Standing seam metal roofing

Source: https://roofingbyskyline.com/roofing/metal-roofing

> Standing seam metal roofs for Bay Area homes and buildings: concealed fasteners, high-temperature underlayment and a very long service life.

Standing seam metal is the longest-lasting roof most homeowners will ever buy, and it suits both modern architecture and hillside homes in fire-prone areas.

Panels are fastened with concealed clips that let the metal expand and contract with temperature, over an underlayment rated for the heat metal roofs generate.

## Ideal for

- Modern and contemporary homes
- Hillside homes in fire zones
- Low-pitch roofs within panel limits
- Solar (clamp-on attachments)

## Why it works

- **Very long service life.** A properly installed standing seam roof can outlast several asphalt roofs.
- **Noncombustible.** Metal roofing is a strong choice in wildfire-prone areas when installed as a Class A assembly.
- **Solar-friendly.** Clamps attach to the seams, so solar can be mounted without drilling through the roof surface.
- **Low maintenance.** No granules to lose, no shingles to replace — just periodic inspection of flashings and sealants.

## The system: Standing seam metal roof

Concealed-fastener panels that float on clips as they expand and contract, over an underlayment rated for the heat metal sees.

Layers, from the substrate up:

1. **Roof deck** — Flat, fastened and dry
2. **High-temperature underlayment** — Rated for use under metal
3. **Clips, trim & flashings** — Panels move without stressing fasteners
4. **Standing seam panels** — Steel or aluminum, raised seams

## Our process

1. **Design the layout.** Panel widths, seam layout and trim details planned around your roof geometry.
2. **Prepare the deck.** Tear-off, deck repair and high-temperature underlayment.
3. **Install panels and trim.** Clips, panels, mechanically seamed laps and custom trim at every edge.
4. **Detail and inspect.** Penetrations, ridges and transitions finished to manufacturer detail.

## Quality checks on every job

- High-temperature underlayment beneath all metal
- Concealed clips that allow thermal movement
- Dissimilar metals separated to prevent corrosion
- Penetrations kept out of panel flats wherever possible

## FAQ

### Is a metal roof noisy in the rain?

Over a solid deck and underlayment, metal roofs are generally no louder than other roofs inside the home.

### Can you install solar on standing seam?

Yes. Seam clamps let solar racking attach without penetrating the panels.


## Contact

- Phone: (415) 209-5199 (+1-415-209-5199)
- Email: info@roofingbyskyline.com
- Hours: Monday–Friday, 8am–5pm
- Service area: San Francisco and the greater Bay Area — San Francisco, The Peninsula, The East Bay, The South Bay, Marin
- License: California C-39 Roofing, CSLB #1138836 (verify: https://www.cslb.ca.gov/OnlineServices/CheckLicenseII/CheckLicense.aspx)
- Request a free assessment: https://roofingbyskyline.com/contact
