Kemper System
Cold liquid-applied, fleece-reinforced waterproofing membranes.
Kemper System has been building fleece-reinforced liquid membranes since the late 1960s in Germany. Resin is applied, a polyester fleece is embedded wet-on-wet, and the result is a seamless, fully reinforced membrane that flashes itself around every detail. We install KEMPEROL systems as a Kemper System Approved Applicator.
Fleece-reinforced liquid membrane
Fleece-reinforced polyurethane and PMMA resins
- Detail-heavy flat roofs and parapets
- Balconies and decks under tile or pavers
- Plazas, podiums and planters
- Green roofs (root-resistant)
- Parking decks with KEMPERDUR wearing surfaces
Chosen for performance, not convenience.
Reinforced everywhere
The fleece runs through the entire membrane — field and flashings alike — giving consistent thickness and strength at the details that usually fail.
Self-flashing
Penetrations, drains, curbs and odd geometry are flashed with the same resin and fleece. No boots, no seams.
Cold-applied, solvent-free options
KEMPEROL 2K-PUR is solvent-free with very low VOC, and nothing on the roof needs a torch.
Proven under overburden
KEMPEROL membranes are used beneath pavers, tile, planters and green roofs, with root-resistant formulations for vegetated assemblies.
Kemper System products we use
- KEMPEROL 2K-PUR
- Two-component, solvent-free polyurethane resin reinforced with polyester fleece. Roofs, plazas, balconies, planters, foundations and wet areas.
- KEMPEROL 2K FR / Reflect
- Fire-rated roofing resin; Reflect White is a cool-roof-rated finish.
- KEMPEROL AC Speed FR
- Fast-curing PMMA resin with fleece for tight schedules; usable beneath pavers, tile or growing media.
- KEMPERDUR TC
- Traffic surfacing over 2K-PUR for concrete parking decks and ramps.
- KEMPERDUR AC
- PMMA wearing surface over AC Speed FR for balconies and walkways.
Fleece-reinforced liquid membrane
Cold liquid-applied resin with a polyester fleece embedded wet-on-wet — one seamless, fully reinforced membrane that wraps parapets, drains and penetrations without a single lap seam to fail.
- 01Structural roof deckConcrete, plywood or cover board
- 02Insulation & cover boardTapered where drainage needs correcting
- 03PrimerChosen after adhesion testing
- 04Resin — saturation coatApplied wet to receive the fleece
- 05Polyester fleece reinforcementEmbedded wet-on-wet, overlapped at laps
- 06Resin — top saturationFully encapsulates the fleece
- 07Surfacing (as specified)Reflective finish or wearing surface
Backed by the manufacturer — and by us.
Kemper System issues warranties only through Approved Applicators, and Approved Applicators must retrain with Kemper every two years. Options include material-only, workmanship-and-materials, and watertightness warranties of up to 25 years on qualifying, fully reinforced systems.
Warranty terms depend on the system, thickness and project. We confirm eligibility in writing in your proposal, register the warranty at closeout and add Skyline’s own written workmanship warranty.
Manufacturer approval
Kemper System
Kemper System Approved Applicator
- Trained on Kemper System America systems and details
- Complete systems, installed to published specifications
- Eligible projects registered for manufacturer warranty
- Plus Skyline’s written workmanship warranty
Where we use Kemper System
Flat & low-slope roofs
Seamless, fleece-reinforced liquid waterproofing for flat and low-slope roofs, installed by a Kemper System Approved Applicator in the Bay Area.
Learn moreDecks & balconies
Walkable waterproofing for decks and balconies over living space, flashed, reinforced, flood-tested and documented by a Gaco Qualified Applicator.
Learn morePlazas, podiums & planters
Protected-membrane waterproofing for podiums, courtyards, planters and green roofs, specified for the overburden and tested before it is buried.
Learn moreParking decks & garages
Vehicular traffic coating systems for parking decks, ramps and podium garages in the Bay Area — waterproofing that protects the slab and the space below.
Learn moreKemper System questions
What is KEMPEROL?
KEMPEROL is Kemper System’s family of liquid resins. Combined with polyester fleece, they form a reinforced waterproofing membrane that is installed in a single wet-on-wet operation.
Does PMMA smell during installation?
Yes. Fast-curing PMMA resins have a noticeable odor while they cure. When that matters, we use the solvent-free polyurethane resin or plan around air intakes, windows and occupancy.
What does “Approved Applicator” require?
Kemper trains applicators on the job and requires retraining every two years. Only Approved Applicators can register Kemper System warranties.
Considering Kemper System for your project?
Tell us what’s going on. We’ll inspect, explain what we find with photos, and give you a written, fixed-price proposal — usually within 48 hours of the visit.