Skip to content
Roofing · Roof types

Standing seam metal roofing

Standing seam metal is the longest-lasting roof most homeowners will ever buy, and it suits both modern architecture and hillside homes in fire-prone areas.

Panels are fastened with concealed clips that let the metal expand and contract with temperature, over an underlayment rated for the heat metal roofs generate.

Standing seam metal roof

Standing seam metal roof: 1. Roof deck, 2. High-temperature underlayment, 3. Clips, trim & flashings, 4. Standing seam panels
Ideal for
  • Modern and contemporary homes
  • Hillside homes in fire zones
  • Low-pitch roofs within panel limits
  • Solar (clamp-on attachments)
Why it works

Done right the first time — and built to last.

Very long service life

A properly installed standing seam roof can outlast several asphalt roofs.

Noncombustible

Metal roofing is a strong choice in wildfire-prone areas when installed as a Class A assembly.

Solar-friendly

Clamps attach to the seams, so solar can be mounted without drilling through the roof surface.

Low maintenance

No granules to lose, no shingles to replace — just periodic inspection of flashings and sealants.

The system

Standing seam metal roof

Concealed-fastener panels that float on clips as they expand and contract, over an underlayment rated for the heat metal sees.

Layer by layer, from the substrate up

  1. 01Roof deckFlat, fastened and dry
  2. 02High-temperature underlaymentRated for use under metal
  3. 03Clips, trim & flashingsPanels move without stressing fasteners
  4. 04Standing seam panelsSteel or aluminum, raised seams
Aerial view of Bay Area homes with shingle, metal and tile roofs.
How we do it

Our process

  1. 01

    Design the layout

    Panel widths, seam layout and trim details planned around your roof geometry.

  2. 02

    Prepare the deck

    Tear-off, deck repair and high-temperature underlayment.

  3. 03

    Install panels and trim

    Clips, panels, mechanically seamed laps and custom trim at every edge.

  4. 04

    Detail and inspect

    Penetrations, ridges and transitions finished to manufacturer detail.

Our standard

What we check on every job

  • High-temperature underlayment beneath all metal
  • Concealed clips that allow thermal movement
  • Dissimilar metals separated to prevent corrosion
  • Penetrations kept out of panel flats wherever possible
Read the full roofing standard
FAQ

Standing seam metal: questions & answers

Straight answers from the people who do the work.

Is a metal roof noisy in the rain?

Over a solid deck and underlayment, metal roofs are generally no louder than other roofs inside the home.

Can you install solar on standing seam?

Yes. Seam clamps let solar racking attach without penetrating the panels.

Free assessment

Let’s keep the water out — for good.

Tell us what’s going on. We’ll inspect, explain what we find with photos, and give you a written, fixed-price proposal — usually within 48 hours of the visit.