Plaza, podium & planter waterproofing
Once pavers, soil or a topping slab go down, the membrane underneath is almost impossible to reach. That’s why plaza and podium waterproofing has to be right the first time — and verified before anything covers it.
We build protected-membrane assemblies on structural slabs: a fully bonded, reinforced membrane, protection course, drainage and the overburden on top, with every drain, curb and wall termination detailed in the same system.
Protected membrane under plaza overburden
- Podium decks over parking or retail
- Courtyards and amenity decks
- Built-in planters
- Green roofs (root-resistant membranes)
- Paver and pedestal roof decks
Built to stay watertight, not just look finished.
Fully bonded to the slab
A bonded membrane keeps water from traveling laterally, so a breach stays small and findable instead of spreading across the deck.
Root-resistant options
Planters and green roofs get membranes tested for root resistance, not just waterproofing.
Drained, not just sealed
Drainage composites and multi-level drains keep water moving beneath the overburden so the membrane isn’t sitting in it.
Verified before burial
Flood testing or electronic leak detection confirms the membrane is watertight before protection and overburden go down.
Protected membrane under plaza overburden
A fully bonded membrane on the structural slab, protected and drained beneath pavers, planters or a green roof — built so the part you can never see again never needs to be seen again.
Layer by layer, from the substrate up
- 01Structural concrete slabCured, repaired and profiled to spec
- 02PrimerWhere the membrane system requires it
- 03Reinforced waterproofing membraneHot-applied or fleece-reinforced liquid
- 04Protection courseShields it from follow-on trades
- 05Drainage compositeCarries water to the drains
- 06Insulation (where specified)Rigid board, protected assemblies
- 07Pavers, planters or green roofThe overburden, drained below
Our process
01
Coordinate early
We review drains, slopes, curbs, door thresholds and planter walls with the design team before the slab is poured or exposed.
02
Prepare the slab
Cure, moisture-test, repair and profile the concrete so the membrane can fully bond.
03
Install and detail
Membrane, reinforcement and terminations at every wall, drain and penetration — continuous, no gaps.
04
Test and protect
Flood or electronic testing, then protection course and drainage go down immediately so follow-on trades can’t damage the work.
What we check on every job
- Concrete moisture tested before membrane application
- Surface profile confirmed against the manufacturer’s requirement
- Terminations carried above finished overburden height
- Flood test (ASTM D5957) or electronic leak detection (ASTM D7877) before cover
- Protection course installed the same day testing passes
Plazas, podiums & planters: questions & answers
Straight answers from the people who do the work.
Hot-applied or liquid membrane — which is better for a podium?
Both are proven under overburden. Hot rubberized asphalt has decades of history on large, simple slabs; fleece-reinforced liquid systems excel on detail-heavy decks and in places where a kettle isn’t practical. We recommend based on the slab, the details and access.
Can you waterproof an existing planter that leaks?
Yes. Planters usually need to be emptied and the old membrane removed or overlaid, then rebuilt with a root-resistant membrane and a working drain. We’ll tell you after inspection whether a targeted repair is realistic.
How do you find a leak under pavers?
Electronic leak detection can locate breaches in many membranes without removing the entire overburden. Where that isn’t possible, we isolate areas with targeted water testing.
Read before you decide
Waterproofing · 2 min read
Flood tests before waterproofing is covered
Once tile, pavers or soil go down, a membrane defect is expensive to find. How ASTM D5957 flood testing and ASTM D7877 electronic leak detection work.
Waterproofing · 2 min read
Fleece-reinforced membranes: why details stay dry
How fleece-reinforced membranes such as Kemper System’s KEMPEROL work on crowded roofs and tiled balconies, and what Approved Applicator means for the warranty.
Waterproofing · 3 min read
SB 721 and SB 326 balcony laws for Bay Area owners
Both first-round balcony inspection deadlines have passed. What SB 721 (apartments) and SB 326 (condos and HOAs) require, and how waterproofing fits the repair.
Let’s keep the water out — for good.
Tell us what’s going on. We’ll inspect, explain what we find with photos, and give you a written, fixed-price proposal — usually within 48 hours of the visit.