Flat & low-slope roofing
Flat roofs are everywhere in the Bay Area — on Victorians, mid-century homes, apartments and commercial buildings. The difference between a flat roof that lasts and one that leaks is almost always drainage and details.
We install single-ply TPO and PVC and modified bitumen systems with tapered insulation to eliminate ponding, heat-welded seams that are probed every day, and reflective surfaces that meet California’s cool-roof requirements. For detail-heavy roofs, we also install fleece-reinforced liquid membranes.
TPO / PVC single-ply roof
- Flat-roofed homes and Victorians
- Apartments and condos
- Commercial buildings
- Roofs with ponding problems
Done right the first time — and built to last.
Positive drainage
Tapered insulation builds slope to drains so water doesn’t sit on the roof.
Heat-welded seams
TPO and PVC seams are welded, not glued, and probed for continuity.
Cool-roof compliant
Reflective membranes meet Title 24 requirements where a reroof triggers them.
Options for every roof
Single-ply, modified bitumen or fleece-reinforced liquid — chosen for the roof, not by habit.
TPO / PVC single-ply roof
Tapered insulation for positive drainage, a cover board for durability, and a reflective, heat-welded membrane that meets California’s cool-roof rules.
Layer by layer, from the substrate up
- 01Roof deckSteel, concrete or wood
- 02Tapered insulationBuilds slope to drains and scuppers
- 03Cover boardProtects against foot traffic and hail
- 04TPO or PVC membraneHeat-welded seams, probed every day

Our process
01
Survey drainage
Map ponding, drains and scuppers, and design tapered insulation where needed.
02
Tear-off and deck repair
Remove wet or failed roofing and repair the deck.
03
Install the system
Insulation, cover board and membrane, with every curb, drain and wall flashed.
04
Probe and document
Seams probed, details photographed, warranty paperwork registered.
What we check on every job
- Ponding corrected with slope, not sealant
- Every heat-welded seam probed
- Edge metal and terminations installed to manufacturer detail
- Cool-roof-rated membranes where Title 24 applies
Flat & low-slope: questions & answers
Straight answers from the people who do the work.
TPO or PVC?
Both are proven. PVC is often preferred where grease or chemicals are present, such as near restaurant exhausts. We’ll recommend based on your building.
How long does a flat roof last?
Single-ply systems commonly last 20–30 years with maintenance. Drainage and details matter more than the membrane brand.
Read before you decide
Waterproofing · 2 min read
Is a roof coating right for your flat roof?
Silicone and elastomeric coatings can add years to a sound flat roof, or trap water in a wet one. How to tell, and what a restoration includes.
Roofing · 3 min read
Title 24 cool roofs and solar-ready roofing
When California’s energy code requires a cool roof, what “cool” means, how Bay Area climate zones change it, and how to plan a roof around future solar.
Roofing · 2 min read
What a professional roof inspection should cover
A roof inspection is more than a look from the ladder. The Bay Area checklist we follow, what the report should include, and when to schedule one.
Let’s keep the water out — for good.
Tell us what’s going on. We’ll inspect, explain what we find with photos, and give you a written, fixed-price proposal — usually within 48 hours of the visit.