Skip to content
Waterproofing · Roof restoration

Roof coatings & restoration

If a flat roof is structurally sound and mostly dry but showing its age, a restoration coating can add years of service without the cost, disruption and landfill of a tear-off.

We install Gaco silicone roof coatings as a Gaco Qualified Applicator. Silicone resists ponding water and UV well, and white silicone is highly reflective — which keeps top floors cooler.

Silicone roof restoration

Silicone roof restoration: 1. Existing roof membrane, 2. Seam & penetration reinforcement, 3. Primer (if required), 4. Silicone base coat, 5. Silicone top coat
Ideal for
  • Aging single-ply, mod-bit or BUR roofs that are still sound
  • Metal roofs with seam and fastener issues
  • Spray foam roofs due for recoating
  • Buildings where a tear-off would disrupt tenants
Why it works

Built to stay watertight, not just look finished.

Avoids a tear-off

Restoring a sound roof can cost a fraction of replacement and keeps old roofing out of the landfill.

Seamless and ponding-tolerant

Silicone forms a continuous membrane and holds up well where water sits after rain.

Cooler building

Highly reflective white finishes lower roof surface temperatures; cool-roof-rated products are available for Title 24 projects.

Renewable

Silicone can be cleaned and recoated at the end of its service life, extending the roof again.

The system

Silicone roof restoration

A seamless, reflective silicone membrane over a sound existing roof — repaired, reinforced and adhesion-tested first, then built to a verified thickness.

Layer by layer, from the substrate up

  1. 01Existing roof membraneCleaned, dried, checked for wet areas
  2. 02Seam & penetration reinforcementPolyester fabric set in coating
  3. 03Primer (if required)Decided by field adhesion testing
  4. 04Silicone base coatApplied to the specified wet mils
  5. 05Silicone top coatBright white, highly reflective finish
How we do it

Our process

  1. 01

    Confirm it’s a candidate

    Core samples or moisture survey to find wet insulation. Wet areas are cut out — coating over them traps water.

  2. 02

    Repair and reinforce

    Fix seams, flashings and penetrations, then reinforce them with fabric set in coating.

  3. 03

    Clean and test adhesion

    Pressure-wash, let dry, and run adhesion tests to decide whether primer is required.

  4. 04

    Coat to thickness

    Apply in passes to the specified wet mils, verified with gauges, and documented for the warranty file.

Our standard

What we check on every job

  • Moisture survey or cores before quoting a coating — never coat over wet insulation
  • Field adhesion test to decide primer, not guesswork
  • Wet-film readings recorded across the roof
  • Seams and penetrations reinforced before the field coat
Read the full waterproofing standard
Warning signs

When to call us

  • Roof is 12–20 years old but still mostly dry
  • Surface crazing, chalking or exposed scrim
  • Minor seam leaks and ponding
  • High top-floor temperatures in summer
FAQ

Roof coatings & restoration: questions & answers

Straight answers from the people who do the work.

How long does a silicone coating last?

Service life depends on thickness, exposure and the condition of the roof underneath. Gaco offers labor-and-material warranties on qualifying systems installed by Qualified Applicators, with terms tied to the coating thickness specified.

Can any roof be coated?

No. Roofs with widespread wet insulation, structural problems or poor attachment need repair or replacement first. We’ll tell you honestly if a coating isn’t the right move.

Will a coating stop my leaks?

The repairs and reinforcement we do before coating are what stop leaks; the coating protects those repairs and the roof as a whole. Skipping the prep is why many coatings fail.

Free assessment

Let’s keep the water out — for good.

Tell us what’s going on. We’ll inspect, explain what we find with photos, and give you a written, fixed-price proposal — usually within 48 hours of the visit.